The range

Collections

The Alana range all carries the same 20 mil wear layer, and what changes between those collections is the board, the pad underneath and the size of the plank. Foundation sits below them as the entry line, on a thinner board at 12 mil, with the plank size printed colour by colour.

Reserve

16 colours · 8 mm SPC · 20 mil wear layer

$4.29 / sq ft

Sixteen oak visuals on the longest plank we stock, and the collection most people end up choosing.

Atlas

10 colours · 8 mm SPC · 20 mil wear layer

$4.29 / sq ft

A micro-bevel edge and a slightly tighter grain. Ten visuals, same 6.5 mm board and 20 mil wear layer as Reserve.

Heritage

5 colours · 8 mm SPC · 20 mil wear layer

$4.29 / sq ft

Five straightforward oak tones on the same 60-inch plank. The line to start with if the room needs to stay quiet and let the furniture talk.

Herringbone

2 colours · 8 mm SPC · 20 mil wear layer

$5.99 / sq ft

A true chevron cut in two tones. The most expensive-looking floor we sell, and the hardest to install.

Comfort

5 colours · 10 mm WPC · 20 mil wear layer

$4.79 / sq ft

A 10 mm WPC core instead of SPC. Warmer and softer underfoot, with a 2 mm pad already attached.

Essential

5 colours · 6.5 mm SPC · 20 mil wear layer

$3.49 / sq ft

The same 20 mil wear layer as the rest of the range, on a 6.5 mm board. The one to choose when a single floor runs through the whole house.

Foundation

6 colours · 5.5 mm SPC · 12 mil wear layer

$3.19 / sq ft

A 5.5 mm rigid core, and the entry point to the range. The only line we hold locally rather than order in.